Create a VM instance in us-west1-c zone with Terraform
Terraform enables you to safely and predictably create, change, and improve infrastructure. It is an open source tool that codifies APIs into declarative configuration files that can be shared among co-workers, treated as code, edited, reviewed, and versioned.
What you'll learn
In this lab, you will learn how to perform the following tasks:
Get started with Terraform in Google Cloud.
Install Terraform from installation binaries.
Create a VM instance infrastructure using Terraform.
Setup and requirements
Before you click the Start Lab button
Read these instructions. Labs are timed and you cannot pause them. The timer, which starts when you click Start Lab, shows how long Google Cloud resources will be made available to you.
This hands-on lab lets you do the lab activities yourself in a real cloud environment, not in a simulation or demo environment. It does so by giving you new, temporary credentials that you use to sign in and access Google Cloud for the duration of the lab.
To complete this lab, you need:
- Access to a standard internet browser (Chrome browser recommended).
- Time to complete the lab---remember, once you start, you cannot pause a lab.
How to start your lab and sign in to the Google Cloud Console
Click the Start Lab button. If you need to pay for the lab, a pop-up opens for you to select your payment method. On the left is the Lab Details panel with the following:
- The Open Google Console button
- Time remaining
- The temporary credentials that you must use for this lab
- Other information, if needed, to step through this lab
Click Open Google Console. The lab spins up resources, and then opens another tab that shows the Sign in page.
Tip: Arrange the tabs in separate windows, side-by-side.
Note: If you see the Choose an account dialog, click Use Another Account.
If necessary, copy the Username from the Lab Details panel and paste it into the Sign in dialog. Click Next.
Copy the Password from the Lab Details panel and paste it into the Welcome dialog. Click Next.
Important: You must use the credentials from the left panel. Do not use your Google Cloud Skills Boost credentials. Note: Using your own Google Cloud account for this lab may incur extra charges.
Click through the subsequent pages:
- Accept the terms and conditions.
- Do not add recovery options or two-factor authentication (because this is a temporary account).
- Do not sign up for free trials.
After a few moments, the Cloud Console opens in this tab.
Activate Cloud Shell
Cloud Shell is a virtual machine that is loaded with development tools. It offers a persistent 5GB home directory and runs on the Google Cloud. Cloud Shell provides command-line access to your Google Cloud resources.
- Click Activate Cloud Shell at the top of the Google Cloud console.
When you are connected, you are already authenticated, and the project is set to your PROJECT_ID. The output contains a line that declares the PROJECT_ID for this session:
gcloud is the command-line tool for Google Cloud. It comes pre-installed on Cloud Shell and supports tab-completion.
(Optional) You can list the active account name with this command:
Your output should now look like this:
(Optional) You can list the project ID with this command:
gcloud, in Google Cloud, refer to the gcloud CLI overview guide.
What is Terraform?
Terraform is a tool for building, changing, and versioning infrastructure safely and efficiently. Terraform can manage existing, popular service providers and custom in-house solutions.
Configuration files describe to Terraform the components needed to run a single application or your entire data center. Terraform generates an execution plan describing what it will do to reach the desired state, and then executes it to build the described infrastructure. As the configuration changes, Terraform can determine what changed and create incremental execution plans that can be applied.
The infrastructure Terraform can manage includes both low-level components such as compute instances, storage, and networking, and high-level components such as DNS entries and SaaS features.
Infrastructure as code
Infrastructure is described using a high-level configuration syntax. This allows a blueprint of your data center to be versioned and treated as you would any other code. Additionally, infrastructure can be shared and re-used.
Terraform has a planning step in which it generates an execution plan. The execution plan shows what Terraform will do when you execute the
apply command. This lets you avoid any surprises when Terraform manipulates infrastructure.
Terraform builds a graph of all your resources and parallelizes the creation and modification of any non-dependent resources. Because of this, Terraform builds infrastructure as efficiently as possible, and operators get insight into dependencies in their infrastructure.
Complex changesets can be applied to your infrastructure with minimal human interaction. With the previously mentioned execution plan and resource graph, you know exactly what Terraform will change and in what order, which helps you avoid many possible human errors.
Task 1. Verifying Terraform installation
Terraform comes pre-installed in Cloud Shell.
Open a new Cloud Shell tab, and verify that Terraform is available:
The resulting help output should be similar to this:
Task 2. Build infrastructure
With Terraform installed, you can immediately start creating some infrastructure.
The set of files used to describe infrastructure in Terraform is simply known as a
Terraform configuration. In this section, you will write your first configuration to launch a single VM instance. The format of the configuration files can be found in the Terraform Language Documentation. We recommend using JSON for creating configuration files.
In Cloud Shell, create an empty configuration file named
instance.tfwith the following command:
Click Open Editor on the Cloud Shell toolbar.
To switch between Cloud Shell and the code editor, click Open Editor or Open Terminal as required, or click Open in a new window to leave the Editor open in a separate tab.
instance.tffile and add the following content in it, replacing
<PROJECT_ID>with your Google Cloud project ID:
This is a complete configuration that Terraform is ready to apply. The general structure should be intuitive and straightforward.
The "resource" block in the
instance.tf file defines a resource that exists within the infrastructure. A resource might be a physical component such as an VM instance.
The resource block has two strings before opening the block: the resource type and the resource name. For this lab, the resource type is
google_compute_instance and the name is
terraform. The prefix of the type maps to the provider:
google_compute_instance automatically tells Terraform that it is managed by the
Within the resource block itself is the configuration needed for the resource.
In Cloud Shell, verify that your new file has been added and that there are no other
*.tffiles in your directory, because Terraform loads all of them:
The first command to run for a new configuration—or after checking out an existing configuration from version control—is
terraform init. This will initialize various local settings and data that will be used by subsequent commands.
Terraform uses a plugin-based architecture to support the numerous infrastructure and service providers available. Each "provider" is its own encapsulated binary that is distributed separately from Terraform itself. The
terraform init command will automatically download and install any provider binary for the providers to use within the configuration, which in this case is just the Google provider.
Download and install the provider binary:
The Google provider plugin is downloaded and installed in a subdirectory of the current working directory, along with various other book keeping files. You will see an "Initializing provider plugins" message. Terraform knows that you're running from a Google project, and it is getting Google resources.
The output specifies which version of the plugin is being installed and suggests that you specify this version in future configuration files to ensure that
terraform init will install a compatible version.
Create an execution plan:
Terraform performs a refresh, unless explicitly disabled, and then determines what actions are necessary to achieve the desired state specified in the configuration files. This command is a convenient way to check whether the execution plan for a set of changes matches your expectations without making any changes to real resources or to the state. For example, you might run this command before committing a change to version control, to create confidence that it will behave as expected.
-outargument can be used to save the generated plan to a file for later execution with
In the same directory as the
instance.tffile you created, run this command:
This output shows the Execution Plan, which describes the actions Terraform will take in order to change real infrastructure to match the configuration. The output format is similar to the diff format generated by tools like Git.
There is a
+ next to
google_compute_instance.terraform, which means that Terraform will create this resource. Following that are the attributes that will be set. When the value displayed is
<computed>, it means that the value won't be known until the resource is created.
If the plan was created successfully, Terraform will now pause and wait for approval before proceeding. In a production environment, if anything in the Execution Plan seems incorrect or dangerous, it's safe to cancel here. No changes have been made to your infrastructure.
- For this case the plan looks acceptable, so type
yesat the confirmation prompt to proceed.
Executing the plan will take a few minutes because Terraform waits for the VM instance to become available.
After this, Terraform is all done!
Test completed task
Click Check my progress to verify your performed task. If you have completed the task successfully, you will receive an assessment score.
- In the Google Cloud Console, on the Navigation menu, click Compute Engine > VM instances. The VM instances page opens and you'll see the VM instance you just created in the VM instances list.
Terraform has written some data into the
terraform.tfstate file. This state file is extremely important: it keeps track of the IDs of created resources so that Terraform knows what it is managing.
In Cloud Shell, inspect the current state:
You can see that by creating this resource, you've also gathered a lot of information about it. These values can be referenced to configure additional resources or outputs.
Congratulations! You've built your first infrastructure with Terraform. You've seen the configuration syntax and an example of a basic execution plan and understand the state file.
Task 3. Test your understanding
The following multiple choice questions should reinforce your understanding of this lab's concepts. Answer them to the best of your abilities.
You installed Terraform from installation binaries and then used it to create a VM infrastructure.
Finish your quest
This self-paced lab is part of the Managing Cloud Infrastructure with Terraform and Automating Infrastructure on Google Cloud with Terraform quests. A quest is a series of related labs that form a learning path. Completing a quest earns you a badge to recognize your achievement. You can make your badge or badges public and link to them in your online resume or social media account. Enroll in any quest that contains this lab and get immediate completion credit. See the Google Cloud Skills Boost catalog to see all available quests.
Take your next lab
Continue your quest with Infrastructure as Code with Terraform. You can also check out these Google Cloud Skills labs:
Next steps/Learn More
- Hashicorp on the Google Cloud Marketplace!
- Terraform Community
- Terraform Google Examples
Google Cloud training and certification
...helps you make the most of Google Cloud technologies. Our classes include technical skills and best practices to help you get up to speed quickly and continue your learning journey. We offer fundamental to advanced level training, with on-demand, live, and virtual options to suit your busy schedule. Certifications help you validate and prove your skill and expertise in Google Cloud technologies.
Manual Last Updated July 13, 2022
Lab Last Tested July 13, 2022
Copyright 2023 Google LLC All rights reserved. Google and the Google logo are trademarks of Google LLC. All other company and product names may be trademarks of the respective companies with which they are associated.