Create multiple web server instances
Configure the load balancing service
Create an HTTP load balancer
Set Up Network and HTTP Load Balancers
In this hands-on lab you'll learn the differences between a network load balancer and an HTTP load balancer and how to set them up for your applications running on Compute Engine virtual machines (VMs).
There are several ways you can load balance on Google Cloud. This lab takes you through the set up of the following load balancers:
You are encouraged to type the commands yourself, which can help you learn the core concepts. Many labs include a code block that contains the required commands. You can easily copy and paste the commands from the code block into the appropriate places during the lab.
What you'll do
Set up a network load balancer.
Set up an HTTP load balancer.
Get hands-on experience learning the differences between network load balancers and HTTP load balancers.
Before you click the Start Lab button
Read these instructions. Labs are timed and you cannot pause them. The timer, which starts when you click Start Lab, shows how long Google Cloud resources will be made available to you.
This hands-on lab lets you do the lab activities yourself in a real cloud environment, not in a simulation or demo environment. It does so by giving you new, temporary credentials that you use to sign in and access Google Cloud for the duration of the lab.
To complete this lab, you need:
- Access to a standard internet browser (Chrome browser recommended).
- Time to complete the lab---remember, once you start, you cannot pause a lab.
How to start your lab and sign in to the Google Cloud Console
Click the Start Lab button. If you need to pay for the lab, a pop-up opens for you to select your payment method. On the left is the Lab Details panel with the following:
- The Open Google Console button
- Time remaining
- The temporary credentials that you must use for this lab
- Other information, if needed, to step through this lab
Click Open Google Console. The lab spins up resources, and then opens another tab that shows the Sign in page.
Tip: Arrange the tabs in separate windows, side-by-side.
Note: If you see the Choose an account dialog, click Use Another Account.
If necessary, copy the Username from the Lab Details panel and paste it into the Sign in dialog. Click Next.
Copy the Password from the Lab Details panel and paste it into the Welcome dialog. Click Next.
Important: You must use the credentials from the left panel. Do not use your Google Cloud Skills Boost credentials. Note: Using your own Google Cloud account for this lab may incur extra charges.
Click through the subsequent pages:
- Accept the terms and conditions.
- Do not add recovery options or two-factor authentication (because this is a temporary account).
- Do not sign up for free trials.
After a few moments, the Cloud Console opens in this tab.
Activate Cloud Shell
Cloud Shell is a virtual machine that is loaded with development tools. It offers a persistent 5GB home directory and runs on the Google Cloud. Cloud Shell provides command-line access to your Google Cloud resources.
- In the Cloud Console, in the top right toolbar, click the Activate Cloud Shell button.
- Click Continue.
It takes a few moments to provision and connect to the environment. When you are connected, you are already authenticated, and the project is set to your PROJECT_ID. The output contains a line that declares the PROJECT_ID for this session:
gcloud is the command-line tool for Google Cloud. It comes pre-installed on Cloud Shell and supports tab-completion.
(Optional) You can list the active account name with this command:
(Optional) You can list the project ID with this command:
gcloud, in Google Cloud, Cloud SDK documentation, see the gcloud command-line tool overview.
Task 1: Set the default region and zone for all resources
In Cloud Shell, set the default zone:
gcloud config set compute/zone us-central1-a
Set the default region:
gcloud config set compute/region us-central1
Learn more about choosing zones and regions here: Regions and Zones documentation
Task 2: Create multiple web server instances
For this load balancing scenario, create three Compute Engine VM instances and install Apache on them, then add a firewall rule that allows HTTP traffic to reach the instances.
Create three new virtual machines in your default zone and give them all the same tag. The code provided sets the zone to
us-central1-a. Setting the tags field lets you reference these instances all at once, such as with a firewall rule. These commands also install Apache on each instance and give each instance a unique home page.
Create a firewall rule to allow external traffic to the VM instances:
Now you need to get the external IP addresses of your instances and verify that they are running.
Run the following to list your instances. You'll see their IP addresses in the
Verify that each instance is running with
curl, replacing [IP_ADDRESS] with the IP address for each of your VMs:
Check your lab progress
Click Check my progress below to verify that you've created a group of web servers.
Task 3: Configure the load balancing service
When you configure the load balancing service, your virtual machine instances will receive packets that are destined for the static external IP address you configure. Instances made with a Compute Engine image are automatically configured to handle this IP address.
Create a static external IP address for your load balancer:
gcloud compute addresses create network-lb-ip-1 \ --region us-central1
Add a legacy HTTP health check resource:
gcloud compute http-health-checks create basic-check
Add a target pool in the same region as your instances. Run the following to create the target pool and use the health check, which is required for the service to function:
Add the instances to the pool:
Add a forwarding rule:
Check your lab progress
Click Check my progress below to verify that you've created an L4 network load balancer that points to the web servers.
Task 4: Sending traffic to your instances
Now that the load balancing service is configured, you can start sending traffic to the forwarding rule and watch the traffic be dispersed to different instances.
Enter the following command to view the external IP address of the www-rule forwarding rule used by the load balancer:
curl command to access the external IP address, replacing
IP_ADDRESS with an external IP address from the previous command:
The response from the
curl command alternates randomly among the three instances. If your response is initially unsuccessful, wait approximately 30 seconds for the configuration to be fully loaded and for your instances to be marked healthy before trying again.
Use Ctrl + c to stop running the command.
Task 5: Create an HTTP load balancer
HTTP(S) Load Balancing is implemented on Google Front End (GFE). GFEs are distributed globally and operate together using Google's global network and control plane. You can configure URL rules to route some URLs to one set of instances and route other URLs to other instances. Requests are always routed to the instance group that is closest to the user, if that group has enough capacity and is appropriate for the request. If the closest group does not have enough capacity, the request is sent to the closest group that does have capacity.
To set up a load balancer with a Compute Engine backend, your VMs need to be in an instance group. The managed instance group provides VMs running the backend servers of an external HTTP load balancer. For this lab, backends serve their own hostnames.
First, create the load balancer template:
Managed instance groups (MIGs) let you operate apps on multiple identical VMs. You can make your workloads scalable and highly available by taking advantage of automated MIG services, including: autoscaling, autohealing, regional (multiple zone) deployment, and automatic updating. Create a managed instance group based on the template:
fw-allow-health-checkfirewall rule. This is an ingress rule that allows traffic from the Google Cloud health checking systems (
188.8.131.52/16). This lab uses the target tag
allow-health-checkto identify the VMs.
Now that the instances are up and running, set up a global static external IP address that your customers use to reach your load balancer.
Note the IPv4 address that was reserved:
Create a health check for the load balancer:
Create a backend service:
Add your instance group as the backend to the backend service:
Create a URL map to route the incoming requests to the default backend service:
Create a target HTTP proxy to route requests to your URL map:
Create a global forwarding rule to route incoming requests to the proxy:
Check your lab progress
Click Check my progress below to verify that you've created an L7 HTTP(S) load balancer.
Task 6: Testing traffic sent to your instances
In the Cloud Console, from the Navigation menu, go to Network services > Load balancing.
Click on the load balancer that you just created (
In the Backend section, click on the name of the backend and confirm that the VMs are Healthy. If they are not healthy, wait a few moments and try reloading the page.
When the VMs are healthy, test the load balancer using a web browser, going to
IP_ADDRESSwith the load balancer's IP address.
This may take three to five minutes. If you do not connect, wait a minute, and then reload the browser.
Your browser should render a page with content showing the name of the instance that served the page, along with its zone (for example,
Page served from: lb-backend-group-xxxx).
You built a network load balancer and an HTTP(s) load balancer. You practiced with instance templates and managed instance groups.
Finish your Quest
This self-paced lab is part of the Qwiklabs Google Cloud Essentials Quest. A Quest is a series of related labs that form a learning path. Completing this Quest earns you the badge above to recognize your achievement. You can make your badge (or badges) public and link to them in your online resume or social media account. Enroll in this Quest and get immediate completion credit for taking this lab. See other available Qwiklabs Quests.
Take your next lab
Continue your Quest with Hello Node Kubernetes, or check out these suggestions:
Next steps/learn more
- Setting up a network load balancer with a backend service
- Setting up a simple external HTTPS load balancer
- External HTTP(S) Load Balancing Overview
Google Cloud Training & Certification
...helps you make the most of Google Cloud technologies. Our classes include technical skills and best practices to help you get up to speed quickly and continue your learning journey. We offer fundamental to advanced level training, with on-demand, live, and virtual options to suit your busy schedule. Certifications help you validate and prove your skill and expertise in Google Cloud technologies.
Manual Last Updated April 20, 2022
Lab Last Tested April 20, 2022
Copyright 2022 Google LLC All rights reserved. Google and the Google logo are trademarks of Google LLC. All other company and product names may be trademarks of the respective companies with which they are associated.